1.
A MOSFET differs from a JFET mainly because ___________

2.
A JFET has high input impedance because ___________

3.
The constant-current region of a JFET lies between

4.
The output characteristics of a JFET closely resemble the output characteristics of a ___________ valve

5.
The gate voltage in a JFET at which drain current becomes zero is called ___________ voltage

6.
In a certain CS JFET amplifier, RD= 1kΩ , RS= 560Ω , VDD=10V and gm= 4500 µS. If the source resistor is completely bypassed, the voltage gain is ___________

7.
In a certain common source D-MOSFET amplifier, Vds =3.2 V r.m. and Vgs = 280 mV r.m.s. The voltage gain is ___________

8.
If the cross-sectional area of the channel in n-channel JEFT increases, the drain current ___________

9.
If the gate of a JFET is made less negative, the width of the conducting channel ___________

10.
If the reverse bias on the gate of a JFET is increased, then width of the conducting channel ___________

error: Content is protected !!