1.
A sudden increase in the total current into a parallel circuit may indicate

2.
In a parallel circuit, the branch with the lowest resistance has the most current.

3.
When a 1.6 kΩ resistor and a 120 Ω resistor are connected in parallel, the total resistance is

4.
Five 100 Ω resistors are connected in parallel. If one resistor is removed, the total resistance is

5.
Four equal-value resistors are connected in parallel. Ten volts are applied across the parallel circuit and 2 mA are measured from the source. The value of each resistor is

6.
The total resistance for two resistors in parallel is equal to the sum of the two resistors.

7.
When an open circuit occurs in a parallel branch, the total resistance decreases.

8.
Addition of resistors in parallel increases total resistance and decreases total current.

9.
The total current divides among parallel resistors in a manner directly proportional to the resistance values.

10.
There is a total of 800 mA of current into four parallel resistors. The currents through three of the resistors are 40 mA, 70 mA, and 200 mA. The current through the fourth resistor is

error: Content is protected !!